Product Parameters and Specification
LG steel props cover the full range of props as floor support, fabricated on different load capacity and adjustable height basis.
Universal Steel Prop 60/48
Shoring Heights: 2.5/3.0/3.5/4.0/5.5 m
Max Working Load 1500kg
Inner Tube :48mm Diameter, 3.5mm Thickness
Outer Tube :60mm Diameter, 3mm Thickness
Flanges 120×120mm×6mm Thickness
Inner Tube Holes 13.5mm Diameter, Holes space 80mm edge to edge
Flange Holes 4×11mm Diameter
Pin 12mm Diameter
Outer Tube Screw 205mm length
Surface Treatment:Painted / Galvanized
Heavy Duty Steel Prop following EN1065 standard AEP-20
Shoring Heights: 2.5/3.0/3.5/4.0/4.5/5.0/5.5m
Max Working Load 2000kg
Inner Tube :63.5mm Diameter, 2.6/2.9mm Thickness
Outer Tube :76mm Diameter, 2.6mm Thickness
Flanges 120×120mm×8mm Thickness
Inner Tube Holes 17.5mm Diameter, Holes space 100mm edge to edge
Flange Holes 4×14mm Diameter
Pin 16mm Diameter
Outer Tube Screw 230mm length
Surface Treatment:Painted / Galvanized
Heavy Duty Steel Prop following EN1065 standard AEP-30
Shoring Heights: 2.5/3.0/3.5/4.0/4.5 m
Max Working Load 3000kg
Inner Tube :63.5mm Diameter, 3.9mm Thickness
Outer Tube :76mm Diameter, 2.6mm Thickness
Flanges 120×120mm×8mm Thickness
Inner Tube Holes 17.5mm Diameter, Holes space 100mm edge to edge
Flange Holes 4×14mm Diameter
Pin 16mm Diameter
Outer Tube Screw 230mm length
Surface Treatment:Painted / Galvanized
Easy installation
Steel support components are highly standardized and can be quickly assembled through welding and bolting. They can be disassembled and assembled manually, greatly shortening the construction period. |
No maintenance required
Compared with concrete support, steel support does not need to wait for maintenance time and can be put into use after installation, which is especially suitable for projects with tight construction periods. |
High reuse rate
Steel support can be removable and recycled, and can be recycled for more than 500 times. The residual value rate is high, and the long-term cost is lower than that of traditional wooden square or concrete support. |
Green and environmental protection
Reduce construction waste and resource waste, avoid dust pollution caused by concrete support demolition, and meet green construction requirements. |
Good concrete forming quality
The steel support system has a high stiffness, reducing the phenomenon of "model increase" and "model explosion" during construction. After demolding, the wall flatness can reach more than 95%, reducing subsequent plastering and repair costs. |
Introduction
Yancheng Lianggong Formwork Co., Ltd, founded in 2010, is a pioneer manufacturer mainly engaged in the production and sales of formwork system & scaffolding. Thanks to 11 years of abundant factory experience, Lianggong has won high praise from customers both home and abroad for satisfactory product quality and perfect after-sales service.
Till now, we have cooperated with lots of top formwork companies and construction companies, such as DOKA,PERI and etc. Our advanced production equipment and proficient front-line employees will guarantee you products with better quality and less time.
Besides, Lianggong has a professional technical department working together with sales department to ensure our customers' requirements are fully achieved. We offer one-stop service, you can choose products either off-the-shelf or customized.
What's more, our company has established a quality management system that meets the requirements of the international quality management system. Our products have strict quality control from the procurement of raw materials to the sale of finished products which have been used in many projects such as industrial civil engineering works, roads and bridges, hydroelectric dam and nuclear power station. We can accept O E M and O D M.
We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits.
For more information, feel free to contact us. We are looking forward to receiving your enquiry soon.
Workshop Photos
Certifications
Exhibitions and Customer Visits
Packing
1. Generally, the total net weight of loaded container is 22 tons to 25tons, which need be confirmed before loading.
2. Different packages are used for different products:
---Bundles: Timber beam, steel props, tie rod, etc.
---Pallet: Small parts will be put in bags and then on pallets.
---Wooden cases: It is available on customer's request.
---Bulk: Some irregular goods will be loaded in bulk in container.
Delivery
1. Production: For full container, normally we need 20-30 days after receive customer's down payment.
2. Transportation: It depends on the destination charge port.
3. Negotiation is needed for special requirements.
1.Consulting,Design,and Quotation
Offer you a general idea of formwork & scaffold among LiangGong various systems, to fit your project demand.Design and Customized forming & shoring proposal according to your structural drawing by Auto-CAD.
2.Manufacture and Quality Inspection
Large-scale production workshop and First-class production line, as well as a professional quality inspection team, which will provide you with high quality standard products.
Test report will be available according to different norms from different regions in order to offer no worries to clients or meet destination authority requirements.
3.Packing and Shipment
From fabrication to loading, use standard export packages to get to your site quickly.
4.Remote or On-site instruction
If you have any questions, we can provide remote or on-site guidance. Our aim is to make customers feel at ease and satisfied throughout the process.
Q1: Are you trading company or manufacturer?
A: We are manufacturer.
Q2. What do you do?
A: We design and manufacture formworkand scaffolding products used for pouring concrete structure in the field of housing,multi-story structure, high rise buildings,towers, sports stadiums, bridges, hydropower stations, industrial structures etc.
Q3: Do you provide samples ? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q4. What can you do for us?
A.We offer our suggestions, drawings of formwork layout, and quotations to the owners, design institutes, or contractors of the construction projects.
B.We sell our products to the contractors, building companies, material supplier or trading companies.
C.We support our worldwide peer companies with our outstanding formwork or scaffolding products.
D.We provide remote or on-site instruction to thebuilders.
Q5. What do you need in order to make a brief design and quotation when we have a construction project to be built?
A:Structural drawing and section drawing.
Q6. How long does it take to make a brief design and quotation after we offer thestructural drawing?
A: In general, it takes 5~7 days based on specific requirements of construction project.
If you have any question, please feel free to contact us !
){kind=link}