| Customization: | Available |
|---|---|
| After-sales Service: | One-Stop Service |
| Certification: | ISO |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
120 Steel FrameFormwork
120 steel frame wall formwork is the heavy type with high strength. With torsion resistant hollow-section steel as frames combined with top quality plywood, 120 steel frame wall formwork stands out for its extremely long life span and consistent concrete finish.
| • All components are ready to use upon arrival at the site. | • The 18mm thick plywood sheet is supported by eight or ten intermediate bars of equal design. They also offer numerous possibilities for the attachment of 120 Steel frame system accessories. The Steel frame is completely painted. |
| • Mainly Used for all types of walls such as Shear walls, • Core walls as well as for various sizes of Columns for Various heights. |
• All the panels can be combined in the various ways, lying on their sides or standing upright. They can also be installed in a staggered arrangement as their interconnection is independent of any dimension modules. |
| • The 120 Steel frame system is a Steel framed Panel System, which is ready for use and very rugged. | • The holes are provided in the vertical edge profiles exact alignment of the erected panel is made possible through the recess of the edge profile by using a crowbar (or nail-remover). |
| • The 3.30m, 2.70m and 1.20m panels have various widths from 0.30m to 2.4m with 0.05m or 0.15m intervals the panel width size can apply with all application efficiency. | • A panel depth of 12cm guarantees good load-bearing capacity (70 KN/m2) So that a Single-Story formwork of 2.70 and 3.30 meters height, concrete pressure and rate of concrete placing need not be taken into consideration. |
| • All 120 Steel frame system are based on cold roll-forming profile for the edges. Theses edge profile is prepared with a special shaping on the inside that allows application of the alignment Couple. | • The 18mm thick plywood is glued 7-fold and when casting against masonry walls. |
Packaging:
1. Generally, the total net weight of loaded container is 22 tons to 25tons, which need be confirmed before loading.
2. Different packages are used for different products:
---Bundles: Timber beam, steel props, tie rod, etc.
---Pallet: Small parts will be put in bags and then on pallets.
---Wooden cases: It is available on customer's request.
---Bulk: Some irregular goods will be loaded in bulk in container.
Delivery:
1. Production: For full container, normally we need 20-30 days after receive customer's down payment.
2. Transportation: It depends on the destination charge port.
3. Negotiation is needed for special requirements.
){kind=link}